A: The Cushioned Slotted Sanding Cylinder has a 1/4" shank, and fits FOREDOM #44 Handpiece and others that use a 1/4" collet.
Includes a key for securing sandpaper, a template for cutting sandpaper to size, and comes pre-loaded with SIA Swiss sandpaper. 3/4" diameter, and 2 1/4" sanding length. Not for use in die grinders.

B: Mini-Cushion Sanding Cylinder has a 1/4" Shank.
3/8" diameter, and 1 7/16 sanding length.

See replacement foam, and sandpaper, available below.

C:Has the much desired 1/8" Shank, Ideal for NSK, RAM, and Dremel.
1/2" diameter, 1 inch sanding length.

Call to order: 1-800-828-5576

High density black foam is cut to fit a single cylinder. Glue it on with contact cement.
38-3830 Large pad (Fits 38-3801).....$1.50
38-3835 Small pad (Fits 38-3802).....$1.50
34-7011 Ultra-mini pad (Fits 34-7001).....$1.20

D: Small Sanding Stick, 1/4" x 6".
CLICK PHOTO TO ENLARGE IT AND GET A BETTER VIEW.

D: Medium Sanding Stick is 1/2" x 8".

D: Sanding Stick, Large is 3/4" x 10" Long.

$3.35 per 5-PAK of Belts
1/4" Stick
37-2806: 120 GRIT .....37-2808: 320 GRIT
37-2807:240 GRIT .....37-2809:400 GRIT
37-2810.....600 GRIT

$4.50 per 5-Pak
for the 1/2" Stick
37-4806:120 GRIT .....37-4807:240 GRIT
37-4808:320 GRIT .....37-4809:400 GRIT
37-4810:600 GRIT

CALL TO ORDER SANDPAPER: 1-800-828-5576
SWISS Sandpaper, Long lasting on Cloth backing, comes 4" wide, 3' long

80 Grit...98-1080
100 Grit...98-1100
120 Grit...98-1120
180 Grit...98-1180

F: 8" Snap-In Handle.
A Variety of replacement blades are available for this handle.
These are not the usual wood rasp! VERY sharp cutting, non-clogging and rust resistant, each tiny blade is precision formed and maintains a very sharp edge. Snap-in design makes a quick change easy. The handle provides extra blade strength.

CLICK ON PHOTO FOR A CLOSER LOOK AT THESE BLADES.

The Microplane® Rigid Blade is flat, stiff and fast cutting, even when hand held because it is not affected by frame tension. It is usually the best Microplane® Hacksaw Blade for quickly roughing out a shape or removing large amounts of material. Use with or without Hacksaw Frame.
Enlarge Photo Above for a better look at these blades.

Prepare to enjoy shaping with more control and precision. The Round Small Microplane® Rasp is very small and meant for specialty work.
Each shaper creates small shavings instead of dust for a healthier work environment.
Dimensions: 7 " x 11/32" x 3/4"

Dimensions: 7 " x 7/32" x 3/4"
Materials: Blade made of 400 series stainless steel. Plastic Handle

Usage Tips
Use on wood, plastic, sheetrock, rubber, and similar materials.
Fine tooth pattern designed for intricate, delicate cuts.
Protect your Microplane® Shaping Rasps by applying light pressure to the end and back of the tool while using. This will help prevent breaking the tool and provide more stability and control to your cuts .

91-1162 Riffler Rasps Medium Cut, 8 piece Set...$12.95

91-1161 Riffler Finde Cut Rasps, 5-Piece set(not pictured) $8.95

K: Every Carver loves this hefty little tool. You'll use it constantly. Both ends have reversible collets, 1/8 and 3/32, so it will hold all of your bits, or a needle, or a piece of coping saw, to reach in and touch up your carvings.