• Variable Speed 1,000-40,000 RPM
  
• Reversible
  
• 3/32 & 1/8 collets included
  
• Bur can be replaced with one touch, just by turning the lever or
  twisting the neck.

(The Evolution is the NEW product but EMAX and GX support continues. Call for brushes and repairs!)


This is a powerful, high-speed, texturing machine! This model incorporated the top seller that is being used in many applications throughout the world. As well as providing an excellent balance of speed, torque, size and mass, it is capable of dealing with rough or
precise work.

NSK tools have shown themselves to be in the forefront when it comes to quality, dependability, and customer service.

The control box has two handpiece ports. An additional handpiece can be attached, or a left-handed user may find the second port easier to use.

A: The phrase “you get what you pay for” is certainly true when considering a high-speed texturing machine. Remember, the ELECTER EMAX is primarily sold for heavy industrial use in the tool and die business. It’s designed to be used three shifts a day, seven days a week. Our price $200 below the list price!

HANDPIECES, Equipped with NK350 Motors.
Add a second handpiece and avoid changing collets. A Handpiece includes the motor, hosepiece, and cord, Ready to plug in and use.

CLICK ON PHOTOS TO ENLARGE FOR A BETTER LOOK AT THESE HANDPIECES.
B: 65-1016 Lever Tyype Standard Handpiece runs at
1,000-35,000 RPM AND Includes 1/8 & 3/32 collets.

1,000-35,000 RPM. Slim and lightweight for comfortable gripping.
1/8 and 3/32 collets. Just twist to replace Bur.

E: 1,000-40,000 RPM brushelss motor. Slim and lightweight for comfortable gripping. 1/8 and 3/32 collets.
Just twist to replace the bur.

D: Evolution Lever Type Standard handpiece. ENK 410S motor.
1,000-40,000 RPM and a brushless motor.
INCLUDES 1/8 and 3/32 collets.

45 DEGREE ANGLE HEAD

D: The 45 degree Angle Head attaches to your existing motor. It is a Collet Mount so you can use the same burs in the angle head that you would use in the standard head. Includes your choice of 3/32 or 1/8 collet. Extra collets are also available.

This foot control can be used as an on-off switch when the speed is set at the control box, or it can be used as a variable speed at the foot feed.

E: GX Foot Control fits Electer GX and EMAX, but not the old style Electer. It can be used as an on-off switch when the speed is set at the control box, or as variable speed at the foot feed.

NSK's Presto air Turbine runs at 350,000 RPMs.

• Non-Lube Insures Clean cuts
  
• Chip Air Mechanism blows dust away from the Bur area.
  
• Special Order. Ten Day Delivery.
  
• List price is $620.00 Our price is $549.00

Includes the handpiece, a heavy cast-metal food feed, air lines, a regulator, water trap, and handpiece holder. Burs purchased separately. Provide your own air compressor. Recommend a minimum 10-12 gallon.

1/16" SHANK Friction Grips available. Click to Enlarge Photo for a close look at these Carbide Burs and Diamonds.

F: COLLETS ARE $53.00 EACH.
65-3116...1/16"
65-3118...1/8"
65-3332...3/32"

HANDPIECE HOLDER (Seen in Photo A)
65-2110.....$20.00

The original RAM Power 35 has been in CASCADE CARVERS product line for years, and has proven that it holds up well. Although by no means does it replace the superb quality of NSK machines, but it fills the bill for lots of folks.

Both the RAM 35 and RAM 45are REVERSIBLE and include:

• Control Box with Overload Protection
  
• Handpiece
  
• Cradle
  
• 1/8 and 3/32 collets.

CLICK TO ENLARGE PHOTOS FOR A CLOSER LOOK!

THESE ARE THE CHOICES FOR HANDPIECES:

64-6114..Tech 2000 Handpiece (Photo A)...$275.00
64-6113.. Slimnose Handpiece. (Photo B)...$285.00
64-6118.. Standard 45,000 RPM Handpiece....$310.00
64-6117..Slimnose 45,000 Handpiece....$320.00

The 45,000 RPM is beefed up with a larger magnet and wire that provides additional speed and torque.
Standard 45,000 Handpiece, 1/8 and 3/32 collet.
(slimnose available below)

Two varieties available, On/Off and Variable.
You'll like a convenient foot pedal, which does not come with the RAM Compact. (no picture.) Call to order.
64-6100...RAM Foot Switch...ON/OFF $22.00
64-6103...RAM Foot Switch Variable Speed on a Dial.$57.00